Microbac Laboratories, Inc., an independent laboratory that performs environmental, food, and life science testing for businesses, performed the efficacy testing using a multi-step process. First, the lab applied the virus to a surface and let it dry. Then, they wiped the surface with a CleanCide/Purefexion Wipe and left the carrier undisturbed for the contact time. The remaining liquid was neutralized and applied to cultured host cells and allowed to incubate for 4–9 days. The remaining viable cells (if any) indicated how effective the liquid was in inactivating the virus.
CleanCide Wipes – Approved on EPA List N
$110.00
-
- Description
- Additional information
- How to Use
- Where to Use
- Product information
- Safety Data Sheet
- CleanCide Brochure
- Reviews (0)
Powerful disinfection—broad efficacy:
- Kills 99.9% of household germs
- Eliminates odor-causing bacteria
- Low pH
- Virucidal, germicidal, fungicidal and tuberculocidal efficacy
- Effective against antibiotic resistant organisms
- Effective against Norovirus
Non-irritating
- No quats or bleach
- EPA category IV (lowest level of toxicity)
- No precautionary statements/PPE
- Will not irritate skin, eyes or lungs
- Highly biodegradable ingredients—no harmful or irritating residues
One-step, no-rinse cleaning & disinfection:
- Proven efficacy in the presence of 5% organic soil load
- 5-minute contact time for disinfection
- No pre-cleaning or post-rinsing steps required
Weight | 6.7 lbs |
---|---|
Dimensions | 8.4 × 8.75 in |
How to Use
Directions for use
A two-step process of cleaning prior to disinfection is required only when surfaces are grossly soiled or there is the possibility of contamination with blood or body fluid. CleanCide Wipes can be used for both cleaning and disinfecting.
- Always wear gloves when cleaning. These wipes are for cleaning surfaces, not for use on skin. Wear a cover gown and face protection in addition to gloves if cleaning up a large body fluid spill.
- Pull cloth wipe from the container at 90° angle making certain to position the wipe between the two pointing arrows appearing on the lid. This permits easy separation of cloths at perforation.
- Unfold cloth and wipe surfaces until visibly wet. Allow solution to air dry.
- Do not wipe the surface dry prior to adequate contact time. Wexford disinfectants contain humectants which evaporate slowly to prolong drying time. Although the surfaces may appear dry, there is still dampness or moisture present. This ensures complete bacteria kill.
- Wipe or rinse any residual, after sufficient contact time, from shiny surfaces if needed.
- Keep small center cap closed to prevent moisture loss from container.
Procedure for Cleaning and Disinfecting Using Wexford CleanCide WipesOn Equipment and Cords
- CleanCide Wipes are for cleaning surfaces only, not for use on skin.
- Pull cloth wipe from the container at 90° angle making certain to position the wipe between the two pointing arrows appearing on the lid. This permits easy separation of cloths at perforation.
- Unfold cloth.
- Start at the connectors and wet down but do not saturate the cables while wiping away from the connectors. It is sometimes necessary to wring out the towelettes to avoid excess fluid on the cables. Allow solution on cables to air dry.
- Do not allow any solution from the towelettes to drip into the cord connectors.
- If pooling occurs at the cord connectors, allow adequate contact time and then dry the connectors before reuse.
- Cords and equipment should not be saturated.
- Do not wipe the surface dry prior to adequate contact time.
- Wipe or rinse any residual, after sufficient contact time, if needed.
- Allow cords to dry before packaging the equipment for reuse.
- Keep small center cap closed to prevent moisture loss from container.
- A two-step process of cleaning prior to disinfection is required only when surfaces are grossly soiled or there is the possibility of contamination with blood or body fluid. CleanCide Wipes can be used for both cleaning and disinfecting.
Where to Use
A Great disinfectant for:
- Schools
- Daycare and Nurseries
- Hospitals and Long-Term Care Facilities
- Office Buildings
- Hospitality
- Households
- Dental
For use on hard, non-porous surfaces:
- Stainless steel
- Chrome
- Glass
- Plastic
- Vinyl
Product information
Safety Data Sheet
CleanCide Brochure
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.